Signal Generation tools for Linux and /dev/dsp


Jim Jackson <jj@franjam.org.uk>

SIGGEN
Release 2.3.10 As with all software: there just maybe bugs

What are the programs?

This is a set of tools for imitating a laboratory Signal Generator, generating audio signals out of Linux's /dev/dsp audio device. There is support for mono and/or stereo and 8 or 16 bit samples. The basic waveform sample generation code is in the file generator.c, the functions here can be added to other programs fairly easily.

The current version can be downloaded from here http://www.comp.leeds.ac.uk/jj/linux/siggen.tgz.

This is a bug fix release.

2.3.10 Release: Paul Martin & Jens Peter Secher (Debian siggen package maintainer), reported problems with swept waveforms. There was an integer overflow problem in some circumstances - usually when using the x10 or x100 options.

Also this release changes the config file name from the old sound.conf to siggen.conf . Users with existing files can do:

  cd ~
  ln -s .sound.conf siggen.conf
 
as root

  cd /etc
  ln -s sound.conf siggen.conf

or simply copy the files

There should also be less warnings now!

2.3.9 Release: Lukas Loehrer reported a problem with writing raw sound files, and Mark Shimonek reported a bug and fix with setting the DSP device.

Several of the programs below are front ends for using the generator functions, mixing the generated outputs and playing them on /dev/dsp. None of the generation programs control the mixer - use your favourite mixer program or use the simple mixer 'smix' which I have included here.

soundinfo A program to display some of the programming capabilities of the sound system support for the mixer device /dev/mixer and the DSP device /dev/dsp. Can easily be changed if the mixer and dsp devices are called something else. Also shows some of the ioctl calls in action :-).\   Further info on your kernel's sound card configuration is given by 'cat /dev/sndstat'.
sgen is a command line signal generator where details are specified from the command line for generating sine, cos, square, triangle, sawtooth, pulse, noise waves. Frequency, sample rate, relative amplitude etc can be specified thru' command line options. The signal is played continuously until the program is stopped. There are options to save the basic raw digital samples raw to file or to a WAVE format file.
swgen is a command line sweep generator. Both the sweeping and swept waveforms can be specified, along with the sweeping frequency and the swept frequency range. Otherwise similar to sgen above.

siggen an Ncurses screen based Signal Generator for 2 seperate channels. On stereo audio cards the 2 channels are played on seperate outputs. On mono cards the 2 channels are digitally mixed onto the one output. Type of waveform, frequency, amplitude, sample rate etc are specified/changed via a screen menu. This is version 2. It plays continuously. Changes to parameters take effect (nearly) immediately. This version is pretty CPU intensive.
sweepgen an Ncurses screen based Sweep generator (see swgen above). It is like siggen. Changes to parameters take effect (nearly) immediately.
tones a command line program to generate several successive tones of varying freq., and optional differing waveforms, durations and intensities.\   The sequence of tones can be either played once (the default), or repetitively or the samples can be written to a file in raw or WAV format. This could make the basis of an auto-dialer for tone phones.\   Check out README.tones and the tones.eg directory for some examples of using the tones program.

smix a simple command line program for getting and setting the mixer settings. (Eee by gum, yet another mixer, yawn).
fsynth an Ncurses based "fourier" synthesis "realtime" generator.

Compiling and installing

You will need the ncurses library and header files. You will need sound card support compiled into your kernel. You can build some of the programs, tones sgen and swgen, without soundcard support. These programs then can be used to generate raw data or WAV files. You can also compile these programs under other OSes than Linux, e.g. Sunos 4.1.

Edit the configuration file config.h, to set the options/defaults you require. The defaults assume compilation under Linux with soundcard support. The file has ample comments and should be self explanatory. If anyone wants to suggest changes for building under other OSes then let me know and I'll inlcude the changes.

Check out the Makefile and edit anything that is wrong for your system. The ncurses library is assumed to be in normal library 'path' and the ncurses include file is assumed to be in either /usr/include/curses or /usr/include/ncurses/curses . If not, edit as appropriate. Just type 'make' to make the programs.

Don't set -Wall in the makefile, the results will be deeply embarassing to yours truly :-)

All the programs support optional interrogation of a common set of configuration files. See CONFIG.FILES for details.

Type 'make sysinstall' to install the programs into /usr/local/bin and the man pages into /usr/local/man/man1. Type 'make localinstall' to install into $HOME/bin and $HOME/man/man1. If none of these are ok for you then copy manually or edit the Makefile. Edit the setting of variable PROGS to customise which programs you install, e.g. you may not wish to install yet another mixer program so delete smix from the list.

These programs have been tested on on various versions of Linux from Kernels 2.0.36 - 2.6.22, and on distributions from RedHat et al., Debian and Ubuntu. Seems to work with ALSA or OSS, and I have reports of it porting to FreeBSD easily. Compiled with no sound card support, the command line utilities should work for creating sound files on most *nix OSes.

Distribution and Copying

Distribution of this package is covered by the terms of the GNU General Public License, version 2. See the file COPYING for further details. These programs are Copyright (c) 1996-2008 Jim Jackson & contributors.

Jim Jackson     <jj@franjam.org.uk>

HomePage http://www.comp.leeds.ac.uk/jj



This document was generated using AFT v5.095